Sony MHC-EC68USB - Using the Timers

MHC-EC68USB.GB.3-294-664-11(1)
25
GB
Other Operations
Using the Timers
e system oers two timer functions. If
you use both timers, the Sleep Timer has
priority.
Sleep Timer:
You can fall asleep to music. is
function works even if the clock is not
set.
Press SLEEP

repeatedly.
If you select “AUTO,” the system
automatically turns o aer the current
disc or USB device stops or in 100
minutes.
Do not select “AUTO” during Synchro
Recording to a USB device, or during the
erase operation.
Play Timer:
You can wake up to CD, tuner or optional
USB device at a preset time.
1 Prepare the sound source.
Press VOLUME +/

to adjust the
volume.
To start from a specic CD track or
le, create your own program (page
23).
2 Press CLOCK/TIMER SET

.
3 Press /

repeatedly
to select “PLAY SET,” then press
ENTER

.
“ON TIME” appears, and the hour
indication ashes.
4 Set the time to start playback.
Press /

repeatedly to set
the hour, and then press ENTER

.
e minute indication ashes. Use the
procedure above to set the minutes.
5 Use the same procedure as in
step 4 to set the time to stop
playback.
6 Select the sound source.
Press /

repeatedly until
the desired sound source appears,
then press ENTER

. e display
shows the timer settings.
7 Press /

to turn o the
system.
e system will be on at the preset
time.
To activate or check the timer again
Press CLOCK/TIMER SET

, press
/

repeatedly until “PLAY
SEL” appears, then press ENTER

.
To cancel the timer
Repeat the same procedure as above until
“OFF” appears, and then press ENTER

.
To change the setting
Start over from step 1.
Tip
e Play Timer setting remains as long as the
setting is not cancelled manually.