EasyManua.ls Logo

Sony MHC-EC68USB - Page 19

Sony MHC-EC68USB
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MHC-EC68USB.GB.3-294-664-11(1)
19
GB
Basic Operations
To change the play mode
Press PLAY MODE
repeatedly while
the USB device is stopped. You can
select normal play (“ ” for all les in
the folder on the digital music player),
shue play (“SHUF” or “ SHUF”), or
program play (“PGM”).
Notes on the USB device
You cannot change the play mode during
playback.
Some time may be needed to start playback
when:
the folder structure is complex.
the memory capacity is excessive.
When the USB device is inserted, the system
reads all the les on the USB device. If there
are many folders or les on the USB device,
it may take a long time to nish reading the
USB device.
Do not connect the system and the USB
device through an USB hub.
With some connected USB devices, aer an
operation is performed, there may be a delay
before it is performed by this system.
If the system is turned o during Resume
Play mode, when the system is turned on
again playback starts from the beginning of
the MP3 le that was in Resume Play mode.
is system does not necessarily support all
the functions provided in a connected USB
device.
Files recorded by this system are played back
in the order of folder creation. Files recorded
by a device other than this system such as
a computer may not be played back in the
order in which they were recorded.
e playback order for the system may dier
from the playback order of the connected
USB device.
Always turn o the system before removing
the USB device. Removing the USB device
while the system is on may corrupt the data
on the USB device.
Do not save other types of les or
unnecessary folders on an USB device that
has MP3 les.
Note
Some les may not be detected by the unit even
if the le format is supported. In such case, see
page 27, 28 for details.
To remove the USB device
1
Press
to stop playback.
2
Check that there is no data being
transferred through the USB device
while recording, erasing, etc.
3
Hold down
on the unit until
“NoDEVICE” appears on the display.
4
Remove the USB device.
Tip
You can also remove the device safely aer the
system is turned o.
Other operations
To Press
Pause playback (or  on the
unit)
. To resume
play, press the button
again.
Stop playback
. To cancel
resume play, press
the button twice and
check that “RESUME”
disappears from the
display.
Select a folder
+/
.
Select a le /
.
Find a point in
a le
Hold down /
during playback,
and release the button
at the desired point.
Select Repeat
Play
REPEAT
repeatedly
until “REP” or “REP1”
appears.
Continued

Related product manuals