27
–
0
g
+
)
≠ +
–
+
GROOVE
DBFB
PHONES
Sound Adjustment
For a powerful sound (GROOVE)
Press GROOVE. The volume switches to
power mode, DBFB is automatically set to full
strength, the equalizer curve changes, and
GROOVE button lights up. Press GROOVE
again to return to the previous volume.
Notes
• With some songs, the music will sound distorted
when you use the DBFB system with the sound
effect if the bass is too strong. Set the DBFB to
“
DBFB
” or “OFF”, or cancel the sound effect (page
28).
• Cancelling GROOVE sets DBFB to “
DBFB
” and
flattens the equalizer curve. To cancel the DBFB
level, press DBFB until the indication disappears.
To listen through the headphones
Connect the headphones to PHONES jack. No
sound will come from the speakers.
Note
If you have connected a super woofer, please note
that sound comes from the super woofer even when
the headphones are connected. Turn off the power
of the super woofer when using headphones.
1/u
(power)
Adjusting the sound
You can reinforce the bass, create a more
powerful sound, and listen with headphones.
To reinforce bass (DBFB)
Press DBFB*.
Every time you press the button, the display
changes as follows:
n DBFB NORMAL (
DBFB
)
µ
DBFB HIGH (
DBFB
)
µ
DBFB OFF (off)
* DBFB = Dynamic Bass Feedback
To Next Page
Loading...
Need help?
General
