Sony MHC-NX3AV Operating Instructions (primary manual) - Page 48

48
Specifications (continued)
Speaker
Front Speaker (SS-NX1)
Speaker system 2-way, bass-reflex type,
magnetically shielded
type
Speaker units
Woofer: 17 cm (6
3
/
4
in.), cone type
Tweeter: 2.5 cm (1 in.), dome type
Nominal impedance 6 ohms
Dimensions (w/h/d) Approx. 210 x 402 x 285
mm (8
3
/
8
x 15
7
/
8
x 11
1
/
8
in.)
Mass Approx. 7.0 kg
(15 lb 7 oz) net per
speaker
Centre/Rear Speaker (SS-RC100)
Speaker system 1-way, 2-unit,
bass-reflex type
Speaker units
Full-range: 8 cm (3
1
/
4
in.), cone type
Nominal impedance 8 ohms
Dimensions (w/h/d) Approx. 225 x 95 x 95 mm
(9
1
/
8
x 3
3
/
4
x 3
3
/
4
in.)
Mass Approx. 1.5 kg
(3 lb 5 oz) net per speaker
For the customers in Canada
Use only the supplied SS-RC100 rear speaker for
connection to the REAR SPEAKER connector, the
supplied SS-RC100 centre speaker for connection to
the CENTER SPEAKER connector on the
MHC-NX3AV.
General
Power requirements
North American models: 120 V AC, 60 Hz
European models: 230 V AC, 50/60 Hz
Australian model: 230 – 240 V AC, 50/60 Hz
Other models: 120 V, 220 V or 230 – 240
V
AC, 50/60 Hz
Adjustable with voltage
selector
Power consumption
U.S.A. model: 290 watts
Canadian model: 290 VA
European model: 250 watts
Other models: 290 watts
Dimensions (w/h/d)
STR-NX3: Approx. 225 x 202 x 356
mm (8
7
/
8
x 8 x 14
1
/
8
in.)
HTC-NX1: Approx. 225 x 202 x 347
mm (8
7
/
8
x 8 x 13
3
/
4
in.)
Mass
STR-NX3: Approx. 8 kg
(17 lb 10 oz)
HTC-NX1: Approx. 4.2 kg
(9 lb 4 oz)
Supplied accessories: AM loop antenna (1)
Remote Commander (1)
Batteries (2)
FM lead antenna (1)
Speaker cords (5)
Front speaker pads (8)
Center and rear speaker
pads (12)
Design and specifications are subject to change
without notice.