4
GB
Getting Started
Step 1: Hooking up the system
Do the following procedure 1 to 6 to hook up your system using the supplied cords and
accessories.
Notes
• Keep the speaker cords away from the
antennas to prevent noise.
• The type of speakers supplied vary
according to the model you purchased
(see “Specifications” on page 59).
1 Connect the speakers.
Connect the speaker cords of front
speakers to the SPEAKER jacks as below.
For the front speakers with jacks,
connect the speaker cords to the speaker
in the same way.
AM loop antenna
Front speaker (Left)Front speaker (Right)
Insert only the stripped portion.
Black/
Stripe (’)
Red/
Solid (‘)
FM antenna
R
+
L
+
–
2
6
5
1
34
To the video input
To Next Page
Loading...
