33
To Press
Check the CHECK on the remote
program repeatedly. After the last
track, “CHECK END”
appears.
Clear a track from CLEAR on the remote in
the end stop mode.
Clear a specific CHECK on the remote
track in stop mode repeatedly until the
number of the track to be
erased lights up, then press
CLEAR.
Add a track to the 1 Select the disc tray with a
program in stop DISC 1~3 button.
mode 2 Select the track by
pressing . or >.
3 Press ENTER.
Clear the entire x once in stop mode or
program twice while playing.
Tips
• The program you made remains in the CD player
even after it has been played back. Press nN to
play the same program again.
• If “--.--” appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20.
– the total playing time has exceeded 100 minutes.
To cancel Program Play
Press PLAY MODE repeatedly until “PGM”
or “SHUFFLE” disappears from the display.
To Next Page
Loading...
