62
GB
Searching for the beginning of a
track (AMS*)
During playback, press . or > (or
.m or M> on the unit) repeatedly for
the number of songs you want to skip forward
(or backward).
The search direction, + (forward) or
– (backward), and the number of songs being
skipped (1~9) appears in the display.
* AMS (Automatic Music Sensor)
Notes
• Do not press Z A or Z B on the unit while playing a
tape, otherwise the tape could be damaged.
• The AMS function may not operate correctly under
the following circumstances:
– when the unrecorded space between songs is less
than 4 seconds long.
– when the unit is placed near a TV.
Tips
• When a tape is inserted, the corresponding presence
indicator lights up in the display.
• If you press TAPE A/B on the unit while the system
is turned off, the system turns on automatically and
“TAPE A” or “TAPE B” is selected as the function
except during Power Saving Mode.
• If you press
H
(or h
H
on the unit) when the
TAPE A function is selected and there is no tape in
deck A, the system automatically switches to the
TAPE B function when there is a tape in deck B and
vice versa. Then, playback will start.
You can record a whole disc onto a tape. You
can use TYPE I (normal) tape. The recording
level is adjusted automatically.
Use the buttons on the unit for the operation.
1 Load a recordable tape into deck B.
2 Press DVD and load a disc you want to
record.
For Super Audio CD, press SA-CD/CD to
select the CD layer.
3 Press CD SYNC.
“SYNC” lights up in the display.
“REC” flashes in the display.
Deck B stands by for recording.
4 Press DIRECTION repeatedly to select
“g” to record on one side or “j”
(or “RELAY”) to record on both sides.
5 Press REC PAUSE/START.
“REC” lights up in the display.
Recording starts.
To stop recording
Press x.
jj
DSGX
A B
Tape – Recording
Recording your favorite
disc onto a tape
— CD Synchro Recording
Example: searching forward 2 songs
To Next Page
Loading...
Need help?
General
