82
GB
1 Connect the audio cords.
See “Hooking up optional components” on
page 80.
2 Start recording manually.
See “Recording onto a tape manually” on
page 63.
Recording the audio signal on
a connected component
1 Connect the audio cords.
See “Hooking up optional components” on
page 80.
2 Start recording.
Refer to the operating instructions provided
with connected component.
Recording the audio and video
signals from a VIDEO CD onto
a video tape
1 Connect optional audio cords from the
VIDEO/SAT OUT jacks and the
supplied video cord from the VIDEO
OUT jack to the audio and video input
jacks of your VCR.
2 Start recording.
Refer to the operating instructions provided
with connected component.
Note
The audio signal from VIDEO/SAT OUT jacks may
cut off for a moment during some operations such as
when you press SOUND FIELD, AUDIO or
KARAOKE MODE.
Recording audio signal
from a connected
component
Recording audio signal on
a connected component
To Next Page
Loading...
