Sony MVS-8000X-C - System Connection

1-46
MVS-8000X/7000X
1-9. System Connection
Confi gure the MVS-8000X series system connections referring to the connection example as shown below.
1. Connection example of the MVS-8000X system
n
The following connection can also be made for the MVS-7000X system.
Ethernet switch
b)
Ethernet switch
b)
Reference video
signal
c)
c)
c)
IXS Series
BKS-R Series
Reference video signal
MKS-8010B System
Control Unit
BVE-9100 Editing Control
System
MVS-8000X Multi Format Switcher
Processor
a)
MKS-8700 Device Control
Unit Pack
The illustration represents the MVS-8000X.
b)
a)
It is recommended that the CTRL and DATA LAN networks be
configured by connecting separate Ethernet switches for each
LAN.
c) Terminate with the supplied 75Ω terminators.
d) This figure shows the rear panel when one MKE-8021A is
installed in the MVE-8000A.
e) The following cannot be used for connection to the MVS-8000X/
MVS-7000X.
Model Relevant serial numbers
MKS-8010 All
MKS-8010A 10001 to 11196
MKS-9011A 10001 to 12000
MKS-9012A 10001 to 21000
DDR
Audio Mixer
VTR
Reference video
signal
c)
Reference video
signal
MVE-8000A-C DME
Processor Pack
d)
Cross cable
Cable with BNC-type
connectors
REMOTE 1
DATA
DATA
CTRL
CTRL
PERIPH
NETWORK B (DATA)
NETWORK B (CTRL)
e)