pg. 40
LAN Diagnostics
For fun, please press the Page button and enter the following menu page: 7431. This will take you to
the DIAG->System Info->LAN Status menu.
This graphically shows the communication between the components you just defined. Just as a side
note, blinking red lines are bad and mean communication is not occurring. This is a great menu to
troubleshoot communication errors.
Errors
The MVS system has a sophisticated internal diagnostic system. These diagnostics start from power-up
and run continuously while power is applied. If MVS detects an error in the system, you will see large
red letters spelling ERROR in the menu display.
To Next Page
Loading...
