32
GB
Performing a DAB Initial
Scan manually
When you turn on the system for the first time after
purchase, the DAB Initial Scan starts to
automatically store available DAB/DAB+ service
information. When you have moved to another
area, perform the DAB Initial Scan manually to
update the DAB/DAB+ service information.
1
Press TUNER repeatedly to select
the DAB function.
2
Press OPTIONS.
“Initial Scan? Push ENTER” appears.
3
Press ENTER.
The DAB Initial Scan starts, and available
DAB/DAB+ service information is stored.
Notes
• Depending on the DAB/DAB+ services available in
your area, scanning may take a few minutes.
• All preset stations that have been stored on the system
are cleared when you perform a DAB Initial Scan or
when scanning is canceled.
• Before unplugging the DAB lead antenna, make sure
the system is turned off to preserve your own DAB/
DAB+ settings.
To Next Page
Loading...
