Sony MZ-N10 Brochure

Precautions on connecting the recorder to a computer
When connecting the recorder to a computer, it is recommended that
you connect the supplied USB cradle to the computer with the
dedicated USB cable and place the recorder on the USB cradle.
If you connect the recorder directly to the computer without using
the supplied USB cradle, please do the following:
• Fully charge the built-in rechargeable battery.
• Insert the dedicated USB cable firmly into the recorder’s USB
cradle connecting jack.
• Place the recorder on a stable place not subject to vibrations.
•Make sure not to touch or disturb the recorder or dedicated USB
cable, especially while checking in/checking out an audio file.
Make sure the above points are carried out. If they are not, audio file
check-out authorization may be reduced.
Sony Corporation  2003 Printed in Japan 0-884-803-11(1)
MZ-N10

Sony MZ-N10 Specifications

Power

power input	DC In, 6V (USB Cradle Input)
power requirements	AC-ES605 AC Adaptor (supplied)
battery type	Embedded Lithium-Ion Battery (supplied)

Battery

battery life (SP Mode)	Embedded 8.5 hrs
battery life (LP2 Mode)	Embedded 11 hrs
battery life (LP4 Mode)	Embedded 14 hrs

Audio Specifications

sampling frequency	44.1 kHz
frequency response	20-20, 000Hz +/-3dB
data compression method	ATRAC®/ATRAC3™

Weight and Dimensions

weight	3 oz (84g)
dimensions	3 1⁄8" x 3" x 9⁄16" (78.5 x 73.3 x 13.8mm)
color	Silver