– 20 –
SECTION 3
DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.
3-1. UPPER PANEL ASSY, BOTTOM PANEL ASSY REMOVAL
r
The equipment can be removed using the following procedure.
Set
Upper panel assy, Bottom panel assy
Main board Mechanism deck
SWITCH UNIT (with JOG DIAL)
Power board, Switch board
CLV board
Optical pick-up assy, REC board
Battery case assy
7
3
1
Screws
(M1.4 precision pan)
Upper panel assy
2
Knob (Open)
4
Screws
(M1.4 precision pan)
6
Screw
(M1.4 precision pan)
5
Screws
(M1.4 precision pan)
Bottom panel assy
To Next Page
Loading...
