– 55 – – 56 –– 53 – – 54 –
MZ-R50
r
Refer to page 62 for IC Block Diagrams.
6-6. SCHEMATIC DIAGRAM – MAIN (2/3) SECTION –
Note:
• All capacitors are in µF unless otherwise noted. pF: µµF
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and
1
/
4
W or less unless otherwise
specified.
• A : B+ Line.
• Power voltage is dc 6V and fed with regulated dc power
supply from external power voltage jack (J901).
• Voltages and waveforms are dc with respect to ground
under no-signal conditions.
no mark : PB
( ) : REC
• Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal produc-
tion tolerances.
• Signal path.
E : PB
a : REC
N : MIC
To Next Page
Loading...
