8
Insert a recordable MD.
Select input.
Recording an MD right away!
The explanation here is for recording through digital input. To record
through analog input, see page 16. To record with a microphone, see
page 15.
Set INPUT switch to match the
input jack connected to the source.
2 Insert a recordable MD
with the label side facing
up, and press the lid
down to close.
2
1
OPEN
INPUT
1 Slide OPEN and
open the lid.
INPUT switch
OPT 1
OPT 2
Input jack
DIGITAL IN OPT 1
DIGITAL IN OPT 2
∫
Select the point to start recording.
END SEARCH
If you want to record from the end of
the previous recording, press END
SEARCH.
(If you want to start recording from the
beginning, skip this step).
3
To Next Page
Loading...
Need help?
General