About Using Peripheral Equipment
55
About Using Peripheral Equipment
How do I change the video resolution of my display?
1 Click Start in the Windows taskbar and then select Control Panel.
2 Select Appearances and Themes, then select Change the screen
resolution.
3 Click the Settings tab.
4 Change the Screen resolution and Color quality to the desired levels.
5 Click Apply and then click OK.
Why doesn’t my connected printer function when the
computer resumes from a power saving mode?
Clear the printer memory by turning the printer off for approximately 10 seconds,
and then turning it back on.
How do I install a printer?
❑ To install your printer, follow these steps:
1 Click Start in the Windows taskbar, then click Control Panel.
2 Click Printers and Other Hardware, then click Add a Printer.
3 From the Add Printer Wizard, click Next.
4 Select Local Printer, then click Next.
5 Select the appropriate port, usually LPT1, and then click Next.
6 Select the appropriate printer manufacturer and model.
7 Follow the on-screen instructions to print a test page and complete
printer installation.
✍ Place a check mark in the box for “Automatically detect and install my Plug and Play
printer”, if you are installing a recently manufactured printer with Plug and Play
capability.
To Next Page
Loading...
