Setup Menu List
95
Menu Configuration and Detailed Settings
OTHERS Menu
OTHERS
Menu items Subitems and setting values Contents
All Reset
Resetting to the
factory status
Execute/Cancel Select “Execute” to reset the camcorder to the factory status.
Camera Data
Storing/recalling
the menu settings
to an SxS memory
card or USB flash
drive
Store
Execute/Cancel
When you select “Execute” to store the setting values to an
SxS memory card, the setup file is stored to one of the
following directories.
For UDF: /General/Sony/PRO/CAMERA/XDCAM/
PMW_xxx/
For FAT: /SONY/PRO/CAMERA/XDCAM_EX/PMW_xxx/
Recall
Execute/Cancel
Select “Execute” to retrieve the setting values from an SxS
memory card.
All Save (USB) (PMW-200 only)
Execute/Cancel
When you select “Execute” to store the setting values to a
USB flash drive, the setup file is stored to the following
directory.
/MSSONY/SONY/PRO/CAMERA/XDCAM/PMW_200/
All Load (USB) (PMW-200 only)
Execute/Cancel
Select “Execute” to retrieve the setting values from a USB
flash drive.
Time Zone
Setting the time
difference
UTC –12:00 to +13:30 Set the time-zone difference from UTC in steps of 30
minutes.
Note
The default setting is different among the sales areas.
United States and Canada: –5:00
Europe area: 0:00
Oceania: +10:00
Clock Set
Setting the built-in
clock
Date/Time Set the current time and date.
12H/24H
12H / 24H
Select the display mode of time.
12H: 12-hour mode
24H: 24-hour mode
Date Mode
YYMMDD / MMDDYY /
DDMMYY
Select the display mode of the date.
YYMMDD: In sequence of year, month, day
MMDDYY: In sequence of month, day, year
DDMMYY: In sequence of day, month, year
Language
Selecting the
language for
menus and
messages
English / Japanese/Chinese English: To display in English
Japanese: To display in Japanese
Chinese: To display in Chinese
Note
“Japanese” is effective only on messages for warning and
caution. The menus and status indications do not change.
To Next Page
Loading...
