To Next PageTo Next Page
Need help?Do you have a question about the Sony PS-1350 and is the answer not in the manual?
General| Speeds | 33 1/3 and 45 rpm |
|---|---|
| Signal to noise ratio | 50 dB |
| Tonearm | Static balance type |
| Tracking force adjustment | 0 to 3 g |
| Frequency response | 20 Hz to 20 kHz |
| Weight | 5.5 kg |
| Type | Belt-drive |
| Platter | Aluminum |
| Cartridge | Magnetic |
| Stylus | Diamond |
| Cartridge weight range | 4 to 10 g |
Specifications for platter, drive system, motor, speeds, wow/flutter, and S/N ratio.
Details on tonearm type, pivot, length, overhang, tracking force, and shell weight.
Information on cartridge type, frequency range, and channel separation.
Details on voltage, frequency, and power consumption for various models.
Specifications for the unit's physical size and mass.
Steps for removing bottom plate, wooden case, and motor board for different models.
Steps and diagrams for safely replacing the turntable cartridge.
Procedures for replacing the tonearm pipe and locking collar.
Instructions for removing and replacing tonearm body base and turntable shaft.
Steps for replacing the shaft bearing and adapting the unit to local line frequencies.
Guide for accurately adjusting tonearm overhang using a protractor.
Procedures for adjusting tonearm height during automatic return and manual cueing.
Steps to adjust the tonearm's automatic return starting position.
How to adjust the microswitch position for automatic return operation.
List of electrical parts with reference numbers, part numbers, and descriptions.
List of included accessories, manuals, and related part numbers.
