251
Settings
US
Network Settings
1 Select (Network Settings) under from the home
menu, and then press the button.
2 Select "Infrastructure Mode", and then press the button.
3 Select "New Connection", and then press the button.
4 Enter a name for the network connection.
When you press the button, an on-screen keyboard ( page 259) is
displayed, allowing you to enter characters for the name. You can choose
any name you like for the network connection.
When you have finished entering your settings, press the right button to go
to the next screen.
5 Set the SSID for the access point.
This screen is used to enter information for the settings listed on the next
page. Refer to the instructions supplied with the access point or router for
setting details.
To Next Page
Loading...
Need help?
General
