Sony PXW-FS7M2 - Page 55

000
5. Menu Display and Settings: Setup Menu List
55
Paint Menu
Paint >White
Sets white balance settings.
Item Sub-item setting Description
Preset White 2100K to 10000K (3200K) Sets the white balance preset value.
Color Temp
<A>
1500K to 50000K (3200K) Displays the white balance color
temperature saved in memory A.
Color Temp.
Balance <A>
–99 to +99 (±0) Sets the white balance gain value saved in
memory A (linked to R gain and B gain).
R Gain <A> –99 to +99 (±0) Sets the white balance R gain value saved in
memory A.
B Gain <A> –99 to +99 (±0) Sets the white balance B gain value saved in
memory A.
Color Temp
<B>
1500K to 50000K (3200K) Displays the white balance color
temperature saved in memory B.
Color Temp.
Balance <B>
–99 to +99 (±0) Sets the white balance gain values saved in
memory B (linked R gain and B gain).
R Gain <B> –99 to +99 (±0) Sets the white balance R gain value saved in
memory B.
B Gain <B> –99 to +99 (±0) Sets the white balance B gain value saved in
memory B.
Filter White
Memory
On / Off Turns the function that sets the white
balance memory area for each ND filter on/
off.
On: Sets the white balance memory for each
ND filter.
[Tip]
In preset mode, there are four settings (CLEAR
/ 1 / 2 / 3). In variable mode, there are two
settings (CLEAR / On).
Off: Sets white balance memory common to
all ND filters.
Shockless
White
Off / 1 / 2 / 3 Sets the white balance response speed when
switching white balance mode.
Off: Switches instantaneously.
1 to 3: Switches more slowly the higher the
number.
White
Switch<B>
Memory / ATW Selects the white balance adjustment mode
that is selected when the WHT BAL switch is
set to B.
Paint >White
Sets white balance settings.
Item Sub-item setting Description
ATW Speed 1 / 2 / 3 / 4 / 5 Sets the response speed in ATW mode.
1: Fastest response speed
Paint >Offset White
Sets white balance offset settings.
Item Sub-item setting Description
Offset White
<A>
On / Off Selects whether to add (On) or not to add
(Off) an offset value to the white balance in
memory A.
Warm Cool
<A>
–99 to +99 (±0) Sets the offset added to the white balance in
memory A as a color temperature when
Offset White <A> is set to On.
Warm Cool
Balance <A>
–99 to +99 (±0) Sets a more precise color temperature, for
use when a satisfactory image cannot be
obtained using Warm Cool <A>.
Offset White
<B>
On / Off Selects whether to add (On) or not to add
(Off) an offset value to the white balance in
memory B.
Warm Cool
<B>
–99 to +99 (±0) Sets the offset added to the white balance in
memory <B> as a color temperature when
Offset White B is set to On.
Warm Cool
Balance <B>
–99 to +99 (±0) Sets a more precise color temperature, for
use when a satisfactory image cannot be
obtained using Warm Cool <B>.
Offset White
<ATW>
On / Off Selects whether to add (On) or not to add
(Off) an offset value to the ATW white
balance.
Warm
Cool<ATW>
–99 to +99 (±0) Sets the offset added to the ATW white
balance as a color temperature when Offset
White <ATW> is set to On.
Warm Cool
Balance
<ATW>
–99 to +99 (±0) Sets a more precise color temperature, for
use when a satisfactory image cannot be
obtained using Warm Cool<ATW>.
Paint >Black
Sets black settings.
Item Sub-item setting Description
Setting On / Off Turns black correction on/off.