Sony PXW-FS7M2 - Page 71

000
5. Menu Display and Settings: Setup Menu List
71
System >Assignable Button
Sets function assignments to assignable buttons.
Item Sub-item setting Description
<1> to <10> Off / Marker / Zebra / Peaking / Video Signal
Monitor / DURATION/TC/U-BIT / Focus
Magnifier x4/x8 / Focus Magnifier x4 / Focus
Magnifier x8 / Push AF/Focus Hold / Focus
Area / Focus Area (Push AF) / VF Mode / ND
Filter Position / IRIS / AGC / Auto ND Filter /
SHUTTER / Auto Exposure Level / Push Auto
Iris / Push AGC / Push Auto ND / Spotlight /
Backlight / ATW / ATW Hold / SteadyShot /
Color Bars / User Menu / Rec Lamp / S&Q
Motion / Picture Cache Rec / Rec Review /
Thumbnail / Shot Mark1 / Shot Mark2 / Clip
Flag OK / Clip Flag NG / Clip Flag Keep / High/
Low Key
Assigns functions to assignable buttons.
Marker:
Turns the marker function on/off.
Zebra:
Turns the Zebra function on/off.
Peaking:
Turns the peaking function on/off.
Video Signal Monitor:
Switches the video signal monitor (such
as a waveform monitor).
DURATION/TC/U-BIT:
Switches between Time Code, Users Bit,
and Duration.
Focus Magnifier x4/x8:
Focus Magnifier x4:
Focus Magnifier x8:
Turns the focus magnifier function on/
off.
Push AF/Focus Hold:
Runs the push auto focus function or
focus hold function.
Focus Area:
Focus Area (Push AF):
Opens the Focus Area setup screen.
VF Mode:
Switches the viewfinder display between
color and B&W.
ND Filter Position
Switches ND filters.
IRIS:
Switches the iris function between Auto
and Manual.
AGC:
Turns the AGC function on/off.
Auto ND Filter
Turns the Auto ND Filter function on/off.
SHUTTER:
Switches the shutter between Auto and
Manual.
Auto Exposure Level:
Opens the Auto Exposure Level screen.
System >Assignable Button
Sets function assignments to assignable buttons.
Item Sub-item setting Description
<1> to <10> Push Auto Iris:
Enables the auto iris function while the
button is pressed.
Push AGC:
Enables the AGC function while the
button is pressed.
Push Auto ND
Enables the Auto ND Filter function
while the button is pressed.
Spotlight:
Switches between Spotlight and
Standard.
Backlight:
Switches between Backlight and
Standard.
ATW:
Turns the ATW function on/off.
ATW Hold:
Pauses ATW function operation.
SteadyShot:
Switches between Active SteadyShot,
SteadyShot, and Off.
Color Bars:
Turns the color bars on/off.
User Menu:
Opens/closes the User menu.
Rec Lamp:
Turns the recording indicator on/off.
S&Q Motion:
Turns Slow & Quick Motion on/off.
Sets the recording frame rate if pressed
and held.
Picture Cache Rec:
Turns picture cache recording mode on/
off.
Rec Review:
Turns the Rec Review function on/off.
Thumbnail:
Opens/closes the thumbnail screen.
Shot Mark1:
Runs the Add Shot Mark1 function.
Shot Mark2:
Runs the Add Shot Mark2 function.