Wireless Connectivity
31
Table of Contents
If an access point’s SSID (Service Set Identifier) is private,
enter Wi-Fi connection information manually.
The access point may filter access by MAC address. Check
the MAC address by pressing the (Home) button tap
[Applications] [Settings] [About] [Device Information],
then register the MAC address with the access point to
establish a Wi-Fi connection.
When you are connected to a Wi-Fi network, you can also
display speed, security and other Wi-Fi network details by
pressing the (Menu) button and tapping [Connection
Information] in the [Wi-Fi Settings] screen.
An access point, once configured, can be connected to
again simply by tapping it in the [Wi-Fi Networks] list and
tapping [Connect].
To Next Page
Loading...
