Adding/Getting Content
72
Adding/Getting Content
Table of Contents
Adding Content
Adding Content
Transferring content via the Reader software (Reader
for PC/Mac)
You can use the Reader software to transfer books and
pictures to the Reader. You will need to install the
Reader software and organize content on your
computer in advance. You can also backup the
contents on the Reader to the Reader software.
Transferring content via drag-and-drop
You can directly transfer content by drag-and-drop to
your computer.
1 Connect the Reader to your computer using
the supplied USB cable.
Make sure the Reader is in a state that can transfer
data. See Details.
To Next Page
Loading...
