20
Using Non-Preset Remote Control
Operations
— Learning Function (continued)
Remote control for
your component
RM-AV3000T
about 2 – 4 inches
(5 – 10 cm) away
3 Press the LEARN key.
“LEARN” appears on the Mode
Display key.
4 Select the desired component of
which signals are to be learned by
pressing the Component Select
button or the Label key.
To change the Label keys, press the
OTHER button repeatedly. Each time
you press the OTHER button, the
display of the Label keys changes as
follows.
All the learnable keys flash.
Example: To programme the N
(Play) signal of your component
to the VCR N (Play) key of the
Commander
1 Place the RM-AV3000T head to
head with your component’s
remote control.
2 While pressing COMMANDER
OFF, press %.
“SET” appears on the Mode Display
key.
COMMANDER
OFF
LEARN
VCR
To Next Page
Loading...
Need help?
General
