73
Setting the Automatic-
Off Time of the Display
Window
The Commander is preset at the factory
to turn off the LCD display window
automatically if you do not operate for
more than 10 minutes. (Then all the
display contents are turned off.) To
change this setting, perform the
following procedure.
You can adjust the Automatic-Off time of
the LCD display window (from 1 minute
to 30 minutes in units of 1 minute).
1 While pressing COMMANDER
OFF, press %.
“SET” appears on the Mode Display
key.
2 Press the Mode Display key (SET)
twice to display “MODE” on one
of the Label keys.
3 Press the MODE key.
“MODE” appears on the Mode
Display key.
4 Press the Mode Display key
(MODE) once to display “DISP-
OFF” on one of the Label keys.
Each time you press the MODE key,
the Label keys changes as follows.
5 Press the DISP-OFF key.
“DISP-OFF” appears on the Mode
Display key.
COMMANDER
OFF
MENU EXIT
COMMANDER
OFF
MORE321
TV STB VCR DVD CD AMP
OTHER
TIMER
SYSTEM CONTROL
OK
6
2,4
7
1
3
5
PROGRAM
Continued
To Next Page
Loading...
Need help?
General
