78
4 Press the Mode Display key
(MODE) once to display
“CONTRAST” on one of the
Label keys.
5 Press the CONTRAST key.
“CONTRAST” appears on the Mode
Display key. “
****
” appears on each
Label key. The DVD display appears
on the other part of the display
window.
6 Press the PROGRAM + or
PROGRAM – button to adjust the
contrast of the display window.
Each time you press the button the
contrast changes as follows.
PROGRAM +:Deeper than the actual
contrast setting
PROGRAM –:Lighter than the actual
contrast setting
7 Press COMMANDER OFF.
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the
previously set mode.
COMMANDER
OFF
Adjusting the Contrast
of the Display Window
1 While pressing COMMANDER
OFF, press %.
“SET” appears on the Mode Display
key.
2 Press the Mode Display key (SET)
twice to display “MODE” on one
of the Label keys.
3 Press the MODE key.
“MODE” appears on the Mode
Display key.
MENU EXIT
COMMANDER
OFF
MORE321
TV STB VCR DVD CD AMP
OTHER
TIMER
SYSTEM CONTROL
OK
2,4
5
7
1
3
6
PROGRAM
COMMANDER
OFF
To Next Page
Loading...
