81
COMMANDER
OFF
Erasing All the Settings
You can erase all the settings to reset the
Commander to its factory settings.
1 While pressing COMMANDER
OFF, press %.
“SET” appears on the Mode Display
key.
2 Press the Mode Display key (SET)
once to display “RESET” on one
of the Label keys on the display.
MENU EXIT
COMMANDER
OFF
MORE321
TV STB VCR DVD CD AMP
OTHER
TIMER
SYSTEM CONTROL
OK
2
4
3,5,6
1
7
PROGRAM
COMMANDER
OFF
Continued
6 Input the name of the Label key.
Follow Steps 2 - 5, on page 24.
7 Press COMMANDER OFF.
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the
previous setting mode.
To Next Page
Loading...
