28
3 Press the YES key.
“REALLY?” stays lit. “YES” and
“NO” flash.
If you press the NO key
The display returns to Step 1.
4 Press the YES key.
While erasing, “c c c c” stays lit.
When all settings programmed for the
Component Select buttons and
corresponding Label keys are erased,
“OK” is displayed with a beep sound.
If you press the NO key
The display returns to Step 1.
5 Press COMMANDER OFF.
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the
previous setting mode.
Using Non-Preset Remote Control
Operations
— Learning Function (continued)
YES
YES
COMMANDER
OFF
To Next Page
Loading...
