Sony RM-IP500 - Page 86

To Previous Page

Sony Corporation

Main Page

Table of Contents2
Introduction4
Using this Manual4
Features4
Location and Function of Parts5
Top5
Rear10
Side / Front11
Menu Operations12
Basic Menu Operations13
Getting Started15
Connections15
VISCA over IP (LAN) Connection15
VISCA RS-422 (Serial) Connection23
Connection with a Video Switcher26
Connection with ILME-FR727
Using a Setup PC28
Accessing a Remote Controller28
Saving Configuration Data on a PC (Backup)29
Restoring Using Configuration Data29
Updating the Firmware29
About the RM-IP Setup Tool30
Using the Panel Sheet for ILME-FR731
Operations33
Turning on the Power33
Selecting a Camera34
Selecting a Camera When Using LAN Connection34
Selecting a Camera When Using Serial Connection34
About the Color of Camera Buttons34
About the Tally Input Lamp Indicators34
Operating a Camera35
Pan and Tilt Control35
Zoom Control36
Adjusting a Camera (Excluding ILME-FR7)38
Adjusting the Focus38
Adjusting the Brightness38
Backlight Compensation (BACKLIGHT)39
Flicker Compensation (FLICKER)39
Adjusting the White Balance39
Adjusting the Black Balance40
Adjusting a Camera (ILME-FR7)41
Adjusting the Focus41
Adjusting the Brightness41
Adjusting the White Balance43
Adjusting the Black Balance43
Recording Video to a Memory Card (ILME-FR7)44
Storing the Camera Status (Preset Function)45
Recalling Stored Status46
Changing the Speed of Movement between Positions46
Recording the Pan/Tilt/Zoom Operation of a Camera (Trace Function)47
Recording the Pan/Tilt/Zoom Operation47
Starting Playback of a Recorded Trace47
Operating the Camera Setup Menu from the Unit (Camera Menu Operation Mode)48
(Excluding ILME-FR7)48
Buttons and Knobs Used for Camera Menu Operations48
Mode) (ILME-FR7)50
Assigning Functions to Assign Buttons51
Recommended Settings for ILME-FR7 Operation53
Recommended Setting 154
Recommended Setting 255
Recommended Setting 356
Recommended Setting 457
Recommended Setting 558
Setting Specific Functions Using Shortcuts (Excluding ILME-FR7)59
Buttons and Knobs Used for FUNCTION Menu Operations59
Operation Using IRIS, GAIN, and SHUTTER Buttons59
Operation Using ASSIGN 4, ASSIGN 5, and ASSIGN 660
Setting Specific Functions Using Shortcuts (ILME-FR7)60
Operating the DETAIL Level, Knee Point, or Audio Input Level61
Operating the Iris, Iso/Gain, Shutter, ND Filter, or Exposure Compensation61
Operating Camera/Lens Assignable Button Functions61
Checking Camera Settings Status (Status Display)62
Restoring Factory Default Settings62
Default Values63
Function of Buttons/Knobs in each Block by Camera Model64
Cameras Other than ILME-FR764
Ilme-Fr766
Operation68
Exposure68
White69
Black69
Detail69
Knee69
Matrix70
Other70
OPERATION Menu Support by Camera Model71
Config73
Rm Setup73
Sw Assign74
Direction74
Gpi I/O75
Lan76
Serial76
Control I/F76
Auto Ip Setup76
Setup Ip76
Assign Cam76
Clear Table76
Swap Cam76
Manual76
Camera Table77
Maintenance77
Model Info77
Update Mode77
Reset78
Sensitivity78
Appendix79
Troubleshooting79
Messages Displayed on the LCD Panel80
Warning Messages80
Error Messages80
Specifications82
Dimensions82
Pin Assignments83
TALLY/CONTACT Connector Input Connection Example84
TALLY/CONTACT Connector Output Connection Example84
Input Waveform of TALLY/CONTACT Connector84
License85
Uip85
Μt-Kernel2.085

Sony RM-IP500 - Page 86

Table of Contents

Related product manuals