9
GB
Location of Parts and Basic Operations
Front panel
1 BACK LIGHT/COMMANDER OFF
Press to turn the backlight on or off. Hold down for
about 2 seconds to turn the LCD off. When the LCD is
off, press to turn on the LCD and backlight.
• To prolong use of the batteries, the LCD automatically
turns off if there are no commands entered in the touch
panel for 10 seconds.
• To view the LCD display without turning on the backlight,
touch the touch panel when both the backlight and LCD
are off.
2 Touch panel
Touch to operate. The commander turns on
automatically.
3 VOL +/– buttons
Use to adjust the volume of the receiver/amplifier.
4 JOG DIAL control
Rotate to scroll through items in a list (etc.).
Push to select the highlighted item.
5 SYSTEM STANDBY button
Normally used to turn off all Sony components. Can
also be used to turn the receiver/amplifier on or off
depending on the settings made in the SETUP screen
(see page 30).
6 MUTING button
Use to mute the sound of the receiver/amplifier.
7 CONTRAST control
Use to adjust the contrast of the LCD.
8 SLEEP button
Use to operate the receiver/amplifier’s sleep function.
The sleep settings appear in the receiver/amplifier’s
display, not the commander’s LCD.
1
23
4
5
6
7
8
Location of
Parts and Basic
Operations
This chapter provides information
about the locations and functions of
the buttons and controls on this unit.
To Next Page
Loading...
Need help?
General
