23
GB
To erase all function signals
“learned” for a specific
component
Continued
Example: To erase all functions
“learned” by the “VCR” mode
1 Follow Steps 1 to 3 on page
21. Then turn the Jog dial
until the component name
flashes rapidly in the
display.
Note
If you have changed the name of
the component (page 26) that name
is displayed.
2 Press the Jog dial.
“OK?” flashes rapidly in the
display.
Tip
You can also press b/B instead of
turning the Jog dial to the left/right.
You can also press OK instead of
pressing the Jog dial.
ELD
R
ARNLE
CV
ELD
OK
ARNLE
?
Jog
dial
To Next Page
Loading...
Need help?
General
