Sony RM-VZ950T - MD, AMP & TAPE Component Functions; Amplifier Control

41
GB
KEY
qa1
31 – 9, 0
41-, -/-- (+10)
qh (D.SKIP)
6m
6N
6M
7z
6x
qfX
MD
FUNCTION
To turn the power on/
off.
To select the track
number. 0 selects track
10.
To select numbers 10
and above.
To select the next disc.
To select the previous
track.
To play.
To select the next track.
To record, press N
while pressing z*. First
release N, then release
z.
To stop.
To pause.
KEY
30 (REV PB)
qh (A/B)
6m
6N
6M
7z
6x
qfX
TAPE
FUNCTION
To play in reverse mode.
To select deck A/B**.
To rewind.
To play.
To fast-forward.
To record, press N
while pressing z*. First
release N, then release
z.
To stop.
To pause.
KEY
qa1
8 Jog dial
qgPROGR +/–
(BAND +/–)
qh (SHIFT)
92 +/–
q;
AMP
FUNCTION
To turn the power on/
off.
To select the input
source**: Changes every
time the Jog dial is
pressed.
• VIDEO 1
• VIDEO 2
• AUX
• TUNER
•CD
• TAPE
• DVD
•TV
• PHONO
• INPUT
Presetting or tuning
frequency up: +
Presetting or tuning
frequency down: –
To shift band or
presetting select.
Volume up: +
Volume down: –
To mute the volume on
the AMP. Press again to
turn muting off.
* You can assign this operation to a
single button (z) using the Learning
function (page 15).
**If you cannot select deck A/B, see
page 14.
* You can assign this operation to a
single button (z) using the Learning
function (page 15).
**If the input source does not have
remote control signals (preset or
“learned”), it is not displayed.