32
GB
Note
Through this operation, all
“learned” functions as well as the
component code numbers, the
names of the components, and the
component selection order are reset
to the factory setting.
1 Follow Steps 1 to 2 on page
30 to go to the DELETE
mode.
2 Turn the Jog dial to select
“ALL.”
“ALL” flashes in the display.
3 Press the Jog dial.
“ALL OK?” flashes rapidly in
the display.
4 Press the Jog dial.
“ALL OK” appears, and “DEL”
flashes in the display.
All settings are erased, and the
Commander returns to the
factory preset.
Erasing all Memorized Settings
(DELETE) (continued)
LL
LDE
A
LLA
OK
LDE
?
LLA
OK
LDE
To Next Page
Loading...
