34
GB
4 Press the Number buttons
to enter the time for the
LCD to turn off.
In this example:
Press 3, 0
You can also press PROGR + or
PROGR – to enter the time.
5 Press the Jog dial.
“OK” appears in the display
for one second. The time for
the LCD to turn off is set, and
the Commander returns to the
top of SET mode.
If “NG” flashes twice
The input time is not effective. Try
again from Step 4.
6 Select “EXIT,” then press
the Jog dial to finish setting.
To cancel setup
Press SET.
FFO
OK
SDI P.
SP
TSE
ID.
Turning Off the LCD (DISP)
(continued)
To Next Page
Loading...
