Sony S200F - Using the Parental Lock Function; Saving Power in Standby Mode

21
GB
Other Functions
Using the parental lock
function
Buttons on the Bar Speaker, except for
the
/ (on/standby) button, will be
disabled.
Press INPUT on the Bar Speaker for
about 5 seconds when the system is
on.
[LOCKED] appears on the display.
To cancel the parental lock function,
press INPUT again for about 5 seconds
to display [UNLOCK].
Saving power in standby
mode
Check that you have made the following
settings:
– [CTRL] in [HDMI] is set to [OFF]
(page 17).
– [S. THRU] in [HDMI] to [AUTO]
(page 17).