HELP
SAL28F28 (2.8/28) (28mm F2.8)
Note for assembling and grease applying positions are shown.
HELP01
Adhesive bond (B-10): J-6082-612-A
1. Attach the mirror tube block, and fix it with three screws and washers tentatively.
2. Perform the “4-2-1. Aperture Diameter Check”.
3. After the aperture diameter check is completed, fix the hood unit with three screws applying the adhesive bond (B-10) and washers as
shown in the figure.
HELP
Mirror Tube Block
Apply the adhesive bond(B-10)(3 areas)
To Next Page
Loading...
