9
2 Start the supplied DVD Player disc.
3 On the startup screen, press the ✕ button.
The Basic Operations screen is displayed.
4 With the Basic Operations screen displayed, press the ✕ button.
The Menu screen is displayed.
5 Select the “Installing DVD Player” option from the Menu screen
and press the ✕ button.
Complete the installation following the onscreen instructions.
Notes
• To view DVD video using the DVD Player installed on a Memory Card (8MB)
(for PlayStation
®2), you must insert the Memory Card (8MB) (for
PlayStation
®2) into a MEMORY CARD slot of the PlayStation®2 console.
• Some DVD Remote Control functions will not work if you use DVD Player
software earlier than version 2.00. Refer to the PlayStation®2 console
instruction manual for details on how to check the version of your DVD Player
software.
For PlayStation
®
2 consoles of model numbers SCPH-30002 and SCPH-35002
GT
,
you must install DVD Player (ver 2.00), or later, on a Memory Card (8MB) (for
PlayStation
®
2) to activate all DVD Remote Control functions.
• Before installing the DVD Player on the Memory Card (8MB) (for
PlayStation
®2), be sure that at least 2,200 KB (2.2MB) of free space is available
on the Memory Card.
• Insert the Memory Card (8MB) (for PlayStation®2) into MEMORY CARD
slot 1 of the PlayStation
®2 console. Installation is not possible with the Memory
Card in MEMORY CARD slot 2.
• Do not remove the Memory Card (8MB) (for PlayStation®2) while the
installation is in progress. The installation will be incomplete if the Memory
Card is removed or the PlayStation
®2 console is turned off or reset while
installing.
To Next Page
Loading...
