19
5 Insert the mains power plug for the PlayStation®2
console into a mains power socket.
6 Turn on the PlayStation®2 console using the MAIN
POWER switch.
7 Press the 1 (standby)/RESET button on the console
front, and check that the main menu appears. The
1 (standby) indicator turns green.
Quitting PlayStation®2 format software
compatible with the Network Adaptor
To quit a software title, follow the on-screen instructions
or the instructions supplied with the software manual. If
you cannot find instructions, you can quit by pressing
the 1 (standby)/RESET button on the PlayStation
®2
console front.
When playing PlayStation
®2 format software compatible
with the Network Adaptor (Ethernet) (for
PlayStation®2), in some cases, you may not be able to
reset a game even if you press the 1/RESET button.
Note
If you are not able to quit a software title by the method
described above, you can force the software to quit by
pressing and holding down the 1/RESET button, until the
1 indicator turns red and the console enters standby mode.
To Next Page
