SDM-S91(E) 4
POWER SAVING FUNCTION
This monitor meets the power-saving guidelines set by VESA,
ENERGY STAR, and NUTEK. If the monitor is connected to a
computer or video graphics board that is DPMS (Display Power
Management Signaling) compliant, the monitor will automatically
reduce power consumption as shown below.
* When your computer enters the “active off” mode, the input signal is
cut and NO INPUT SIGNAL appears on the screen. After 20 seconds,
the monitor enters the power saving mode.
** “deep sleep” is the power saving mode defined by the Environmental
Protection Agency.
*** If only the horizontal or vertical sync signal is input to the monitor,
the power indicator may alternately flash green and orange.
Power mode Power consumption 1 (power)
indicator
normal
operation
50 W (max.) green
active off*
(deep sleep)**
3 W (max.) orange***
power off 3 W (max.) off
To Next Page
Loading...
