Need help?Do you have a question about the Sony SDX420C and is the answer not in the manual?
General| Model | SDX420C |
|---|---|
| Category | Storage |
| Type | Data Cartridge |
| Data Transfer Rate (native) | 24 MB/s |
| Interface | SCSI |
| Generation | AIT-3 |
| Transfer Rate (native) | 24 MB/s |
| Compatibility | AIT-3 |
Details the capacities and transfer rates of SDX-420 and SDX-520 series drives.
Avoid placing the drive in locations with high humidity, temperature, shock, or direct sunlight.
Do not move the drive when operating; avoid sudden temperature changes and power cycling during writes.
Use original packaging and remove the tape before moving the drive.
Explains jumper configurations for Master, Slave, or Cable Select on the IDE interface.
Details DIP switch functions for data compression and control settings.
Provides dimensions for mounting holes specific to the 3.5" standard height drive.
Provides dimensions for mounting the 5.25" half height drive.
Covers remodeling from 5.25" to 3.5" models and drive orientation.
Identifies the Busy, Tape, and Status LEDs on the drive's front panel.
Explains the meaning of various LED combinations indicating drive status.
Covers loading, unloading, and write-protecting tape cassettes.
Guidance on when and how to use a cleaning cassette for the drive.
Step-by-step procedure for manually ejecting a tape in emergencies.
Lists the ATA commands that the drive supports.
Lists the ATAPI packet commands supported by the drive.
Details physical dimensions, altitude, vibration, and acoustic noise.
Specifies operating and non-operating temperature and humidity limits.
Lists voltage, ripple, and current needs for SDX-420 and SDX-520 series.
Covers suspended particulate, ESD, and air-cooling requirements.
To Next Page