53
Basic VCR / Radio Operations
Using the unit after setting the timer
You can use the unit to select and listen to or watch other input sources
(see “Audio/Video Equipment Operations” from page 59) during timer
recording standby and timer recording.
To use the unit’s VCR before a timer recording begins, just press TIMER
REC ON/OFF. The TIMER indicator turns off and the unit’s VCR
switches on. Remember to press TIMER REC ON/OFF again to reset
the timer after using the unit‘s VCR.
You can also do the following VCR related tasks while the unit’s VCR is
recording:
• Reset the counter.
• Display tape information on the TV screen.
• Check the timer settings.
To Next Page
