To Next PageTo Next PageWhat to do if the MP3 audio track cannot be played on my Sony DVD VCR Combo?
The DATA CD may not be recorded in the MP3 format that conforms to ISO9660 Level 1/Level 2 or Joliet. Also, the MP3 audio track may not have the extension “.MP3.” The data may not be formatted in MP3 even though it has the extension “.MP3.” The data may not be MPEG1 Audio Layer 3 data. The player cannot play audio tracks in MP3PRO format.
What to do if the remote commander for my Sony DVD VCR Combo does not function?
First, ensure you are pointing the remote commander at the remote sensor on the DVD-VCR. If that doesn't work, replace all the batteries in the remote commander with new ones if they are weak. Also, make sure the TV / DVD·VIDEO switch is set correctly. Finally, select correctly VIDEO or DVD with the SELECT DVD/ VIDEO button.
Why won't my Sony DVD VCR Combo play the disc?
Several reasons may prevent the disc from playing. Ensure that the disc is not turned over and that you insert the disc with the playback side facing down on the disc tray. Check if the disc is skewed. Note that the player cannot play certain discs. The region code on the DVD must match the player. The player also cannot play CD-Rs, CD-RWs, or DVD-Rs that are not finalized. Make sure the TV / DVD·VIDEO switch is set correctly and select correctly VIDEO or DVD with SELECT DVD/ VIDEO button.
What to do if the timer on my Sony DVD VCR Combo does not operate?
Several issues could prevent the timer from working. Verify that the clock is set and that a tape has been inserted. Check that the safety tab has not been removed and that the tape is not at its end. Ensure that a program has been set for timer recording and that your timer settings are past the current time. Also, check that the cable box is turned on. If the DVD-VCR is disconnected from the wall outlet for more than one minute, the clock stops, so reset the clock and timer. Finally, turn the power off and unplug the AC power cord.
Why does the tape start playing as soon as it is inserted into my Sony DVD VCR Combo?
This occurs because the safety tab has been removed. To record on this tape, cover the tab hole.
What to do if a tape cannot be inserted into my Sony DVD VCR Combo?
Check that a tape is not already in the tape compartment.
What does it mean when the clock has stopped and “--:--” appears on my Sony DVD VCR Combo?
The clock stops if the DVD-VCR is disconnected from the wall outlet. Reset the clock and timer.
What to do if the ?/1 switch does not function on my Sony DVD VCR Combo?
Connect the AC power cord securely.
Why does the disc not start playing from the beginning on my Sony DVD VCR Combo?
Program play, shuffle play, or repeat play, may have been selected. Also, resume play may have taken effect.
How to fix the picture rolling vertically during picture search on my Sony DVD VCR Combo?
Adjust the vertical hold control on the TV or monitor.
General| Type | DVD VCR Combo |
|---|---|
| Brand | Sony |
| Model | SLV-D300P |
| DVD Player | Yes |
| VCR Player | Yes |
| Video Format | NTSC |
| Recording Format | VHS |
| Audio Output | Stereo |
| Remote Control | Yes |
| DVD Player Type | Standard |
| Progressive Scan | No |
| Width | 16.9 inches |
| VHS Playback | Yes |
| Output Resolution | 480i |
| Playable Media Format | DVD, CD |
| Height | 3.9 inches |
| DVD Formats | DVD-R, DVD-RW |
| Connectivity | Composite Video Output |
