Sony SLV-N80 - Page 50

50
Presetting channels
Tips
• To select the channel in step 3 above, you can also use the CH +/– buttons. In this case, you
don’t need to press ENTER.
• If you want to return to the previous menu, highlight RETURN and press OK.
Note
• When adjusting FINE TUNING, the menu may become difficult to read due to interference
from the picture being received.
2
Press M/m to highlight TUNER PRESET,
then press OK.
3
Press the number buttons to select the
channel you want to fine-tune, then press
ENTER.
4
Press M/m to highlight FINE TUNING,
then press OK.
The fine tuning meter appears.
5
Press </, to adjust to a clearer picture,
then press OK.
Note that the AFT setting switches to OFF.
6
Press MENU to exit the menu.
PLAY
OK
TUNER PRESET
CABLE
ADD
ON
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
FINE TUNING
RETURN
SET :
SELECT :
OK
MENUQUIT :
CH 1
123
456
789
0
TUNER PRESET
CABLE
ADD
ON
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
FINE TUNING
RETURN
SET :
SELECT :
OK
MENUQUIT :
CH 5
Selected channel
PLAY
OK
TUNER PRESET
CABLE
ADD
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
FINE TUNING
RETURN
SET :
SELECT :
OK
MENUQUIT :
CH 5
PLAY
OK
TUNER PRESET
CABLE
ADD
OFF
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
FINE TUNING
RETURN
SET :
SELECT :
OK
MENUQUIT :
CH 5
MENU