S
Sean ProctorSep 4, 2025
Why doesn't the on/standby switch function on my Sony SLV-SE630?
- Bbrian16Sep 5, 2025
If the on/standby switch on your Sony VCR isn't functioning, ensure the mains lead is securely connected to the mains.
To Next PageTo Next PageWhy doesn't the on/standby switch function on my Sony SLV-SE630?
If the on/standby switch on your Sony VCR isn't functioning, ensure the mains lead is securely connected to the mains.
What to do if the timer does not operate on my Sony SLV-SE630?
If the timer on your Sony VCR isn't working, verify these points: * Ensure the clock is properly set. * Confirm a tape is inserted. * Check that the safety tab on the tape hasn't been removed. * Make sure the tape isn't at its end. * Verify a program has been set for timer recording and that your timer settings are past the current time. * Check that the decoder and satellite tuner are turned on. Note that the clock will stop if the VCR is disconnected from the mains, requiring you to reset the clock and timer. As a last resort, turn the power off and unplug the mains lead.
What to do if nothing happens when I press REC on my Sony SLV-SE630?
If nothing happens when you press REC on your Sony VCR, ensure that the tape is not at its end.
What to do if the tape is ejected when I press REC on my Sony SLV-SE630 VCR?
If the tape is ejected when you press REC on your Sony VCR, it's likely that the safety tab has been removed. To record on this tape, cover the tab hole.
What to do if my Sony SLV-SE630 tape starts playing as soon as it is inserted?
If your Sony VCR tape starts playing immediately upon insertion, the safety tab has likely been removed. To enable recording on this tape, cover the tab hole.
How to fix the Sony SLV-SE630 VCR when the sound from a recorded tape is not in stereo?
If the sound from a tape recorded with your Sony VCR is not in stereo, or if the STEREO indicator in the display window is flashing, try adjusting the tracking. Additionally, the video heads may be dirty, so clean them using a Sony video head cleaning cassette.
Why does my Sony SLV-SE630 VCR have no sound?
If your Sony VCR picture has no sound, the tape may be defective. If you're using A/V connections, check the audio cable connection.
How to fix a picture that is not clear on my Sony SLV-SE630 VCR?
If the picture on your Sony VCR isn't clear, try these steps: * Reset the RF channel output of your VCR, as existing broadcasts may be interfering. * Adjust the tracking using the PROGRAM +/- buttons on the VCR. * Clean the video heads using a Sony video head cleaning cassette. If a Sony cleaning cassette is not available, have the heads cleaned at your nearest Sony service facility. Avoid using commercially available liquid-type cleaning cassettes other than Sony’s, as they may damage the video heads. The video heads may need replacement; consult your local Sony service facility for more information.
What to do if my Sony SLV-SE630 is plugged in but the display window remains dark?
If the display window on your Sony VCR remains dark even when plugged in, set the POWER SAVE option in the USER SET menu to OFF.
What to do if the playback picture does not appear on the TV screen with my Sony SLV-SE630?
If you're not seeing a playback picture from your Sony VCR on the TV screen, make sure the TV is set to the correct video channel. If you're using a monitor, set it to video input. If the VCR is connected to the TV with a Scart cable, ensure the VIDEO indicator is lit in the display window by pressing the TV/VIDEO button on the remote.
Details about colour systems, RF output, aerial out, and tape speed.
Steps to perform after service to ensure safe operation for the customer.
Introduction to the manual and initial setup procedures.
References to pages detailing specific parts and controls.
How to use the remote commander for VCR and TV operations.
Instructions for connecting the VCR to other audio/video devices.
How to select the appropriate TV system for optimal performance.
How to rearrange or disable preset channel positions.
How to insert and play a video tape.
Instructions for recording TV programmes.
How to play or search tapes at different speeds.
Settings to reduce power usage when the VCR is in standby.
Steps for performing basic editing tasks like dubbing.
Troubleshooting common power-related issues.
Troubleshooting problems related to the VCR's clock function.
Troubleshooting common playback problems.
Basic steps for connecting the VCR to a TV and power.
Initial automatic setup for channels and settings.
Setting the correct time and date for timer functions.
Disassembly instructions for mono models.
Steps to remove the cabinet top for Hi-Fi models.
Location and details of the Main PCB for Main A models.
Block diagram showing functional areas of the Main PCB.
Schematic diagram of the Switched-Mode Power Supply for Main B models.
Schematic diagram of the Power Drive Block for Main B models.
Schematic diagram of the System Control/Servo for Main B models.
Schematic diagram for the Hi-Fi audio section.
Schematic diagram for On-Screen Display, VPS, and PDC functions.
Schematic diagram for the A2/NICAM audio system in Hi-Fi models.
Schematic diagram for input/output via SCART connectors for Main B models.
Schematic diagram for the function block of Main B models.
General reference for adjustment procedures and remote control buttons.
Locates the TEST switch (SW7T01) on the Function PCB for adjustment mode.
Identifies test points for mechanical adjustments.
Procedure to adjust the ACE Head Position (X-Point).
Steps to set NVRAM option numbers for model compatibility.
Visual breakdown of parts for disassembly and replacement.
Detailed list of electrical components and their part numbers.
Exploded view of the instrument assembly for Hi-Fi models.
Exploded view of mechanical parts on the bottom side.
General
