To Next PageTo Next Page
Need help?Do you have a question about the Sony SLV-SE40 and is the answer not in the manual?
General| Type | VCR |
|---|---|
| Video Format | VHS |
| Recording Speed | SP, LP, EP |
| Playback Speeds | SP, LP, EP |
| Playback Head | 4-Head |
| Number of Heads | 4 |
| Audio System | Hi-Fi Stereo |
| Timer Recording | Yes |
| Remote Control | Yes |
| Tuner | Yes |
| Weight | 3.0 kg |
| Inputs | Composite video, Stereo audio |
| Outputs | Composite video, Stereo audio |
| Dimensions | 360 x 100 x 260 mm |
Procedure after service to ensure safety before unit release.
Explanation of error codes displayed on the fluorescent tube.
Initial setup: unpacking, remote, VCR connection, and basic config.
Playing tapes, recording, timer functions, and other operations.
Instructions for disassembling the front panel and outer casing.
Details on accessing and removing the FI-15 and DS-83 circuit boards.
Steps for removing the rear panel of the VCR unit.
Instructions for disassembling the power block and MA-338 board assembly.
Steps for disassembling the S mechanism deck unit.
Visuals of internal components and their part numbers.
Identifies the location of key circuit boards within the VCR.
A high-level overview of the VCR's functional blocks and connections.
Detailed block diagram illustrating the video signal path and processing.
Block diagram showing servo, system control, and tuner functions.
Block diagram detailing the audio signal path and processing.
Block diagram illustrating the power supply unit and its distribution.
Schematic diagram for the main frame and its associated components.
Schematic diagram for the MA-338 board, focusing on Record/Playback functions.
Schematic diagram for the MA-338 board, covering video and audio sections.
Schematic diagram for the MA-338 board, detailing the audio processing circuits.
Schematic diagram for the MA-338 board, illustrating servo and system control functions.
Schematic diagram for the MA-338 board, showing the display control circuitry.
Schematic diagram for the MA-338 board, detailing input and output interfaces.
Schematic diagram for the MA-338 board, covering the tuner section.
Schematic diagram for the MA-338 board, illustrating the power supply circuits.
Schematic diagram for the MA-338 board, focusing on SECAM video processing.
Printed wiring board and schematic for the FI-15 interface board.
Printed wiring board and schematic for the DS-83 dual shuttle board.
Printed wiring board and schematic for the power block switching regulator.
Describes the interface pins of IC162 for video and RP blocks on the MA-338 board.
Describes the interface pins of IC162 for servo peripheral circuits on the MA-338 board.
Describes the interface pins of IC162 for mechanism block interactions on the MA-338 board.
Describes the interface pins of IC162 for system control circuits on the MA-338 board.
Describes the interface pins of IC162 for audio block functions on the MA-338 board.
Details the pin functions of the microprocessor (IC420) for mode control.
Refers to a separate manual for mechanical adjustment procedures.
Guides for performing electrical adjustments on the VCR.
Lists required equipment and connection setup for VCR adjustments.
Describes the setup for electrical alignment using a PAL pattern generator.
Details the contents of the KRV-51P alignment tape for PAL systems.
Instructions for connecting test equipment for VCR adjustments.
General notes and abbreviations for parts identification.
Exploded view and parts list for the front panel and upper case.
Exploded view and parts list for the VCR chassis.
Exploded view and parts list for the first section of the mechanism deck.
Exploded view and parts list for the second section of the mechanism deck.
Exploded view and parts list for the third section of the mechanism deck.
Comprehensive list of electrical components with part numbers, descriptions, and remarks.
