Sony SLV-SE730 - User Manual

Questions and Answers

H
harrisemmaSep 19, 2025
Why does the display window become dim on my Sony SLV-SE730 VCR?
- C
  Christine WeaverSep 22, 2025
  The display window automatically dims when the VCR is in standby or timer recording mode.
C
Carrie OchoaAug 25, 2025
Why is there no picture on my TV screen from my Sony VCR?
- R
  Richard SimmonsAug 25, 2025
  If no TV program appears on the screen when using your Sony VCR, ensure the TV is set to the correct video channel or video input if you're using a monitor. Also, existing broadcasts may interfere with the VCR, so you might need to reset the RF channel output of your VCR. Finally, select the correct source using the INPUT SELECT button. Choose a program position when recording TV programs, or a line input when recording from other equipment.
A
Alexis MartinAug 25, 2025
How to fix poor TV reception on my Sony VCR?
- A
  April BradyAug 26, 2025
  To improve poor TV reception on your Sony VCR, ensure the aerial cable is securely connected and adjust the TV aerial. Verify that the TV system is correctly set for your TV. Also, confirm that the TV SYSTEM (B/G or D/K) in the INSTALLATION menu matches the system in your local area.
N
Nina NguyenAug 26, 2025
What to do if the playback picture does not appear on the TV screen with my Sony SLV-SE730?
- D
  Derek GarciaAug 27, 2025
  If you're not seeing a playback picture from your Sony VCR on the TV screen, make sure the TV is set to the correct video channel. If you're using a monitor, set it to video input. If the VCR is connected to the TV with a Scart cable, ensure the VIDEO indicator is lit in the display window by pressing the TV/VIDEO button on the remote.
S
shannon26Sep 23, 2025
How to clean my Sony SLV-SE730 VCR?
- W
  William SullivanSep 23, 2025
  Clean the cabinet, panel, and controls of your Sony VCR with a dry, soft cloth, or a soft cloth slightly moistened with a mild detergent solution. Avoid using solvents like alcohol or benzine.
T
Thomas MillerSep 23, 2025
Why doesn't the Line Through function operate on my Sony SLV-SE730 VCR?
- S
  steven28Sep 23, 2025
  If the Line Through function does not operate on your Sony VCR, set POWER SAVE in the USER SET menu to OFF.
M
Matthew RogersSep 10, 2025
Why doesn't the VPS/PDC function operate properly on my Sony VCR?
- J
  johnstonmelissaSep 10, 2025
  If the VPS/PDC function isn't operating correctly on your Sony VCR: * Check that the clock and date are set accurately. * Verify the VPS/PDC time you set is correct. Note that if the broadcast you wanted to record didn't send the correct VPS/PDC information, the VCR won't start recording. Poor reception can also alter the VPS/PDC signal, preventing the VCR from starting the recording.
S
Sandra TaylorSep 12, 2025
Why is a Canal Plus programme always recorded scrambled on my Sony VCR?
- L
  Lisa WilliamsSep 12, 2025
  If a Canal Plus program is always recorded scrambled on your Sony VCR, make sure the Canal Plus Scart cable is securely plugged in. Also, check that DEC is set to ON for this channel in the TV STATION TABLE menu.
L
lisa85Sep 3, 2025
What does it mean if the clock has stopped and '– –:– –' appears in the display window of my Sony SLV-SE730?
- S
  Stanley RichSep 4, 2025
  If the clock has stopped and “– –:– –” appears in the display window of your Sony VCR, the VCR has likely been disconnected from the mains. Reset the clock and timer.
R
rdavisSep 1, 2025
What to do if the tape is ejected when I press REC on my Sony SLV-SE730?
- A
  alvarezgeorgeSep 2, 2025
  If the tape is ejected when you press REC on your Sony VCR, it's likely that the safety tab has been removed. To record on this tape, cover the tab hole.