Why I cannot control other TVs using my Sony SLV-SE700G?
To control other TVs with your Sony VCR, set your TV’s code number. Note that the code number may change when you replace the batteries of the remote commander.
What to do if the remote commander for my Sony VCR does not function?
If the remote commander for your Sony VCR isn't working, ensure you're pointing it directly at the remote sensor on the VCR. If the batteries are weak, replace them with new ones. Also, check that the [TV] / [VIDEO] remote control switch is set correctly.
How to fix Sony VCR when no TV programme appears on the TV screen?
If you're not seeing a TV program on your screen through your Sony VCR, first ensure the TV is set to the video channel, or the monitor to video input. If using Scart and aerial cables, make sure the RF channel is set to OFF. Reset the RF channel output if existing broadcasts are interfering. Ensure the correct source is selected with the INPUT SELECT button. Select a programme position when recording TV programmes; select a line input when recording from other equipment.
What to do if my Sony SLV-SE700G timer does not operate?
If the timer on your Sony VCR isn't working, check the following: * Ensure the clock is set. * Make sure a tape has been inserted. * Check that the safety tab has not been removed. * Make sure the tape is not at its end. * Ensure a programme has been set for timer recording. * Verify your timer settings are past the current time. * Check that the set top box is turned on. If the VCR was disconnected from the mains for more than one hour, reset the clock and timer. Also, try turning the power off and unplugging the mains lead.
Why is there no sound from my Sony SLV-SE700G VCR picture?
If you're not getting any sound from your Sony VCR, and you made A/V connections, check the audio cable connection. The tape may also be defective.
How to fix the SMARTLINK function on my Sony SLV-SE700G?
If the SMARTLINK function isn't working on your Sony VCR, check that your TV complies with SMARTLINK, MEGALOGIC, EASYLINK, Q-Link, EURO VIEW LINK, or T-V LINK. Ensure you're using the Scart cable to connect the VCR and your TV, and that the Scart cable is securely connected.
What to do if my Sony VCR clock has stopped and “–:– –” appears in the display window?
If the clock on your Sony VCR has stopped and “–:– –” appears in the display window, reset the clock and timer.
Why does the display window on my Sony SLV-SE700G become dim?
The display window on your Sony VCR automatically becomes dim when the VCR is in standby or timer recording mode.
How to fix Sony SLV-SE700G if a tape cannot be inserted?
If you're unable to insert a tape into your Sony VCR, check that a tape isn’t already in the tape compartment.
What to do if the sound from a tape recorded with my Sony SLV-SE700G VCR is not in stereo?
If the sound from a tape recorded with your Sony VCR is not in stereo, or if the STEREO indicator in the display window is flashing, try adjusting the tracking. Also, clean the video heads using the Sony T-25CLD, E-25CLDR, or T-25CLW video head cleaning cassette.
Safety guidelines and important precautions for operating the VCR.
How to insert batteries and use the remote for VCR and TV control.
Steps for connecting the VCR to your TV using aerial or Scart cables.
Guide to automatically setting TV channels, VIDEO Plus+ guide channels, and VCR clock.
Steps to tune your TV to receive video signals from the VCR via RF channel.
Step-by-step guide to manually set the VCR's date and time for timer functions.
Instructions on how to insert and play back a video tape using the VCR.
Step-by-step guide for recording TV programmes using the VCR.
How to set up timer recordings using the Dial Timer feature.
How to simplify timer recordings by entering a PlusCode from a TV programme guide.
Instructions for manually setting the VCR timer for programme recordings.
Solutions for common VCR problems related to power, clock, playback, and recording.
Safety guidelines and important precautions for operating the VCR.
How to insert batteries and use the remote for VCR and TV control.
Steps for connecting the VCR to your TV using aerial or Scart cables.
Guide to automatically setting TV channels, VIDEO Plus+ guide channels, and VCR clock.
Steps to tune your TV to receive video signals from the VCR via RF channel.
Step-by-step guide to manually set the VCR's date and time for timer functions.
Instructions on how to insert and play back a video tape using the VCR.
Step-by-step guide for recording TV programmes using the VCR.
How to set up timer recordings using the Dial Timer feature.
How to simplify timer recordings by entering a PlusCode from a TV programme guide.
Instructions for manually setting the VCR timer for programme recordings.
Solutions for common VCR problems related to power, clock, playback, and recording.
General| Type | VCR |
|---|---|
| Video Format | VHS |
| Recording Speed | SP, LP, EP |
| Number of Heads | 4 |
| Remote Control | Included |
| Playback Speeds | SP, LP, EP |
| Audio Output | Mono |
| On-Screen Display | Yes |
| Clock/Timer | Yes |
| Power Consumption | 17W |
| Playback Features | Auto Tracking |
| Connections | RF output |
| Tuner Channels | 181 channels |
| Outputs | RCA |
To Next Page
