Administrating the Camera
Setting the Schedule — Schedule Menu
74
SNC-CX600W/CX600: Mail Transfer (Event), Mail
Transfer (Periodical) , Edge Storage movie, Edge
Storage still image (Event), Edge Storage still
image (Periodical), Voice alert, White LED,
HTTP alarm notification, FTP still image
sending (Event) and FTP still image sending
(Periodical).
Action
Displays an action name to set the schedule.
Always
Select the checkbox to always enable the specified
condition for each action.
Always is not available for Day/Night.
Interval
You can set the interval of the action which is set to
execute periodically.
Setting the schedule
You can set the schedule by arranging the schedule area
of each action. Click on the area you want to set the
schedule; 1 block for 1 hour. When you double-click on
a selected area, the dialog of setting the start time and
duration appears, and you can set the details.
If you want to delete a schedule you have set, select the
schedule and press the delete key on your keyboard.
Note
When the execution condition of Mail Transfer is set to
Periodical, the interval can be set from 30 minutes to 24
hours.
OK/Cancel
See “Buttons common to every menu” on page 23.
To Next Page
Loading...
Need help?
General
