Sony STR-DA2100ES Operating Instructions for STRDA2100ES - Other Operations; Naming Preset Stations and Inputs

masterpage:Left
lename[E:\SEM_Janet\Revision
D
ata\J9050000_2580805131DA2100ES_US\2580805131\US070TH_STR-DA2100ES-U.fm]
44
US
model name1[STR-DA2100ES]
[2-580-805-13(1)]
You can enter a name of up to 8 characters for
preset stations and inputs selected with INPUT
SELECTOR, and display it in the receiver’s
display.
To index a preset station
1 Turn INPUT SELECTOR to select tuner
(“FM” or “AM”).
2 Press FM/AM to select “FM” or “AM”.
3 Tune in the preset station you want to
create an index name for (page 26).
4 Turn MAIN MENU to select
“ TUNER ”.
5 Turn MENU to select “NAME IN”.
6 Press MEMORY/ENTER.
The cursor flashes and you can select a
character. Follow the procedure of “To
create an index name” page 44.
To index an input
1 Turn INPUT SELECTOR to select an
input you want to create an index name
for.
2 Turn MAIN MENU to select
“ CUSTOMIZE ”.
3 Turn MENU to select “NAME IN?”.
4 Press MEMORY/ENTER.
The cursor flashes and you can select a
character. Follow the procedure of “To
create an index name” page 44.
To create an index name
1 Use MENU and –/+ to create an index
name.
Turn –/+ to select a character, then turn
MENU to move the cursor to the next
position.
Tips
• You can select the character type as follows by
rotating –/+.
Alphabet (upper case) t Numbers t Symbols
• To enter a blank space, rotate –/+ until a blank
space appears in the display.
• If you made a mistake, rotate MENU until the
character you want to change flashes, then rotate
–/+ to select the correct character.
2 Press MEMORY/ENTER.
The entered name is registered.
Other Operations
Naming preset stations
and inputs
US01COV_STR-DA2100ES-U.book Page 44 Wednesday, July 13, 2005 2:17 PM