Sony STR-DA3600ES - Network Settings

121
GB
Adjusting Settings
Network settings
Makes the settings for the network.
Lets you make the network settings.
To check the network settings
1
Select “Network Setup,” then press
.
2 Select “Network Information,” then
press .
The network setting information of the
receiver is displayed on the TV screen.
To configure network settings
automatically
1
Select “Network Setup,” then press
.
2 Select “Internet Setup,” then press .
3 Select “Connect Automatically
(DHCP),” then press .
“Success! The receiver is now connected to
network.” appears on the TV screen.
4 Press to select “Finish.”
To set the IP address manually
1
Select “Network Setup,” then press
.
2 Select “Internet Setup,” then press .
3 Select “Manual Configuration,” then
press .
The setting screen for the IP address
appears on the TV screen.
4 Select the IP address, then press .
The soft keyboard appears on the TV
screen.
5 Press V/v/B/b and to select a
character one by one to enter the IP
address.
6 Select “Finish,” then press .
7 Press b to display the next screen.
8 Repeat the process in steps 4 to 7
again to enter the Subnet Mask,
Gateway address, DNS1 address, and
DNS2 address.
9 Select “Test Connection,” then press
.
“Success! The receiver is now connected to
network.” appears on the TV screen.
10Press to select “Finish.”
To set the Proxy server
manually
1
Select “Network Setup” then press .
2 Select “Proxy Setup,” then press .
3 Select “Enable,” then press .
4 Press .
The soft keyboard appears on the TV
screen.
5 Press V/v/B/b and to select a
character one by one to enter the proxy
server address.
6 Select “Finish,” then press .
7 Press b to select the Port number box,
then press .
The soft keyboard appears on the TV
screen.
8 Press V/v/B/b and to select a
character one by one to enter the port
number.
9 Select “Finish,” then press .
10Press b.
11Select “Finish,” then press .
Network Setup
continued